Blow Molding Machine Sumitomo Gear Pump With Low Pressure Pulsation
| Cover End Pressure [Max: |
75.0 LB |
| Rotation: |
Flange Mount |
| Minor Diameter [Max: |
Left Hand (CCW) |
| Mounting: |
3520VQ25A11-11CC20-LH |
| Weight: |
3 |
| Shaft Key: |
Flange |
| Displacement Cover End (cu in/revolution): |
N/A |
| Shaft End RPM [Max: |
Standard Pilot |
| PDF |
|
Product Details
| Cover End Pressure [Max |
75.0 LB |
| Rotation |
Flange Mount |
| Minor Diameter [Max |
Left Hand (CCW) |
| Mounting |
3520VQ25A11-11CC20-LH |
| Weight |
3 |
| Shaft Key |
Flange |
| Displacement Cover End (cu in/revolution) |
N/A |
| Shaft End RPM [Max |
Standard Pilot |
| Minor Diameter |
1.25 in |
| Shaft End Flow @ RPM |
14 Tooth Splined |
| Port Type |
3520VQ |
| Major Diameter [Max |
1 15/16 in |
| Integral Valve Configuration |
Double |
| Shaft End Pressure [Max |
Buna-N |
| Shaft Seal Type |
2500 |
| Pressure Port Size, Cover End |
1.04 in |
| GPM @ 1,800 rpm, Cover End |
SAE C, 2 Bolt |
| Shaft Type |
Single Shaft Seal |
| Displacement Shaft End (cu in/revolution) |
5 |
| Port Orientation - Shaft End |
2500 |
| Spline Description |
2500 |
| Port Size |
N/A |
| Shaft Dia. |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Model No. |
1.248 in |
| Cover End RPM [Max |
1.247 in |
| Manufacturer Part No. |
N/A |
| Mounting Flange |
N/A |
| Max. RPM [Max |
N/A |
| Relief Valve Setting |
25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Pump Series |
3520VQ25A11-11CC20-LH |
| Minor Diameter [Min |
3000 |
| Cover End Flow @ RPM |
3000 |
| Controlled Flow Rate |
16.5 |
| Major Diameter [Min |
37.5 |
| Shaft Length |
w/o Integral Valves |
| Seal Material |
Outlet 45° CW from Inlet |
| Pilot Type |
Outlet Inline w/Inlet |
| Pressure Port Size, Shaft End |
3/4 in Flange |
| GPM @ 1,800 rpm, Shaft End |
1 1/4 in Flange |
| Port Orientation - Cover End |
2.2 |