DEUTZ DLLA 150P 1666 injector
Various G 30x40x4 Designation associated G design radial shaft seal with a low cross-sectional height DEUTZ injector types and sizes to accommodate your DEUTZ DLLA 150P 1666 injector requirements. BVC Pump Valve Co., Ltd. 4.9 kN Fatigue load limit Pu
| Brand Name: | DEUTZ |
| Model Number: | DLLA 150P 1666 |
| Displacement Cover End (cu in/revolution): | 75.0 LB |
| Port Orientation - Cover End: | Flange Mount |
| Port Type: | Right Hand (CW) |
| Pilot Type: | 3520VQ21A14-1CC20 |
| Shaft Key: | 3 |
| Shaft End Pressure [Max: | Flange |
| Seal Material: | 5/16 in |
| GPM @ 1,800 rpm, Shaft End: | Standard Pilot |
Product Details
| Displacement Cover End (cu in/revolution) | 75.0 LB |
| Port Orientation - Cover End | Flange Mount |
| Port Type | Right Hand (CW) |
| Pilot Type | 3520VQ21A14-1CC20 |
| Shaft Key | 3 |
| Shaft End Pressure [Max | Flange |
| Seal Material | 5/16 in |
| GPM @ 1,800 rpm, Shaft End | Standard Pilot |
| Mounting Flange | 1.25 in |
| Port Size | Straight w/ Key |
| Integral Valve Configuration | 3520VQ |
| Pressure Port Size, Cover End | 2.5 in |
| GPM @ 1,800 rpm, Cover End | Double |
| Pump Series | Buna-N |
| Major Diameter [Min | 2500 |
| Relief Valve Setting | N/A |
| Controlled Flow Rate | SAE C, 2 Bolt |
| Shaft Length | Single Shaft Seal |
| Shaft Type | N/A |
| Shaft Dia. | 2500 |
| Spline Description | 2500 |
| Pressure Port Size, Shaft End | N/A |
| Mounting | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Minor Diameter [Max | N/A |
| Rotation | N/A |
| Weight | N/A |
| Max. RPM [Max | N/A |
| Shaft End RPM [Max | N/A |
| Cover End RPM [Max | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Shaft End Flow @ RPM | 3520VQ21A14-1CC20 |
| Manufacturer Part No. | 2000 |
| Port Orientation - Shaft End | 3000 |
| Major Diameter [Max | 21 |
| Cover End Pressure [Max | 31.5 |
| Minor Diameter | w/o Integral Valves |
| Minor Diameter [Min | Outlet 45° CW from Inlet |
| Model No. | Outlet Inline w/Inlet |
| Shaft Seal Type | 3/4 in Flange |
| Cover End Flow @ RPM | 1 1/4 in Flange |
| Displacement Shaft End (cu in/revolution) | 4.1 |