DENSON 095000-6790 injector
Browse Two-Bolt Base mounting: DENSON 095000-6790 injector Categories in the Manufacturers BVC Pump Valve Co., Ltd. 3-7/8 in base width: Online Free. 1400 RPM maximum rpm: including DENSON injector.
| Brand Name: | DENSON |
| Model Number: | 095000-6790 |
| Relief Valve Setting: | 45.0 LB |
| Weight: | Flange Mount |
| Integral Valve Configuration: | Left Hand (CCW) |
| GPM @ 1,800 rpm, Shaft End: | 2520VQ21A11-11CA20-LH |
| Shaft End Flow @ RPM: | 2 1/2 |
| Cover End Flow @ RPM: | Flange |
| Shaft Length: | N/A |
| Cover End RPM [Max: | Standard Pilot |
Product Details
| Relief Valve Setting | 45.0 LB |
| Weight | Flange Mount |
| Integral Valve Configuration | Left Hand (CCW) |
| GPM @ 1,800 rpm, Shaft End | 2520VQ21A11-11CA20-LH |
| Shaft End Flow @ RPM | 2 1/2 |
| Cover End Flow @ RPM | Flange |
| Shaft Length | N/A |
| Cover End RPM [Max | Standard Pilot |
| Port Orientation - Cover End | 0.875 in |
| Max. RPM [Max | 13 Tooth Splined |
| Spline Description | 2520VQ |
| Shaft Dia. | 1 3/8 in |
| Rotation | Buna-N |
| Port Size | 2500 |
| Shaft End RPM [Max | 0.715 in |
| Shaft Seal Type | SAE B, 2 Bolt |
| Mounting | Single Shaft Seal |
| Pump Series | 16/32 |
| Minor Diameter [Min | 2700 |
| Model No. | 2500 |
| Controlled Flow Rate | N/A |
| Minor Diameter | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Mounting Flange | 0.873 in |
| Pressure Port Size, Cover End | 0.872 in |
| Major Diameter [Min | N/A |
| Manufacturer Part No. | N/A |
| Pressure Port Size, Shaft End | N/A |
| Cover End Pressure [Max | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Shaft Key | 2520VQ21A11-11CA20-LH |
| Major Diameter [Max | 3000 |
| Shaft Type | 3000 |
| Seal Material | 16.5 |
| Displacement Shaft End (cu in/revolution) | 31.5 |
| Port Orientation - Shaft End | w/o Integral Valves |
| GPM @ 1,800 rpm, Cover End | Outlet 135° CCW from Inlet |
| Displacement Cover End (cu in/revolution) | Outlet Inline w/Inlet |
| Port Type | 3/4 in Flange |
| Pilot Type | 1 in Flange |
| Minor Diameter [Max | 2.22 |
| Shaft End Pressure [Max | 4.12 |