Rexroth SV10PA1-4X/ check valve
Welcome to the Deep Groove Ball Bea Bearing Used Rexroth SV10PA1-4X/ check valve online 6 Bearing I.D. d(mm) seller.
| Brand Name: | Rexroth |
| Model Number: | SV10PA1-4X/ |
| Rotation: | 1/4 in |
| Pilot Type: | Standard Blue Paint |
| Port Size: | Axial Piston Pumps |
| Major Diameter [Min: | PVM045 |
| Cover End Pressure [Max: | 52.0 LB |
| GPM @ 1,800 rpm, Cover End: | Right Hand (CW) |
| Shaft Seal Type: | PVM045ER05CS01AAA2800000AA0A |
| Pressure Port Size, Shaft End: | Tube Ports |
Product Details
| Rotation | 1/4 in |
| Pilot Type | Standard Blue Paint |
| Port Size | Axial Piston Pumps |
| Major Diameter [Min | PVM045 |
| Cover End Pressure [Max | 52.0 LB |
| GPM @ 1,800 rpm, Cover End | Right Hand (CW) |
| Shaft Seal Type | PVM045ER05CS01AAA2800000AA0A |
| Pressure Port Size, Shaft End | Tube Ports |
| Shaft End RPM [Max | Open Circuit Axial |
| Mounting Flange | 1800 rpm |
| Spline Description | 11 gpm @ 1000 rpm, 13 gpm @ 1200 rpm, 17 gpm @ 1500 rpm, 20 gpm @ 1800 rpm |
| Pressure Port Size, Cover End | SAE-24 |
| GPM @ 1,800 rpm, Shaft End | 0.875 in |
| Cover End RPM [Max | 7/8 |
| Controlled Flow Rate | Straight Keyed |
| Manufacturer Part No. | 20 gpm @ 1800 rpm |
| Max. RPM [Max | SAE-16 |
| Displacement Cover End (cu in/revolution) | Electric Motor Speeds |
| Port Orientation - Shaft End | Pressure Compensator |
| Model No. | 1 5/16 in |
| Displacement Shaft End (cu in/revolution) | Side Port |
| Shaft Length | Buna-N |
| Minor Diameter | 4 in |
| Minor Diameter [Max | 20 |
| Shaft Dia. | SAE B, 2 Bolt |
| Relief Valve Setting | 5 3/4 in |
| Pump Series | Adjustable Maximum Displacement Stop & Single Shaft Seal |
| Integral Valve Configuration | SAE B |
| Port Orientation - Cover End | 1200 |
| Seal Material | N/A |
| Shaft End Pressure [Max | 5000 |
| Major Diameter [Max | 55 hp |
| Weight | PVM045ER05CS01AAA2800000AA0A |
| Mounting | SAE A, 2 Bolt, 9 Tooth Spline |
| Port Type | 2.75 |
| Cover End Flow @ RPM | 163 |
| Shaft Type | None |
| Shaft Key | 5000 psi |
| Minor Diameter [Min | 4000 |
| Shaft End Flow @ RPM | 4600 |
| Pressure Compensator Setting | 280 Bar |
