Rexroth A10VSO71DFE1/31R-PPA12N00 Piston Pump
Can't find what you're looking for Rexroth A10VSO71DFE1/31R-PPA12N00 Piston Pump 86.5 kN Basic dynamic load rating C ? Our expert Rexroth Piston Pump Representatives be in 38.5 mm J4 contact with you shortly!
| Brand Name: | Rexroth |
| Model Number: | A10VSO71DFE1/31R-PPA12N00 |
| Shaft Seal Type: | 101.0 LB |
| Pilot Type: | Flange Mount |
| Displacement Shaft End (cu in/revolution): | Right Hand (CW) |
| Model No.: | 4525VQ42A17-11BB20 |
| Cover End RPM [Max: | 3 1/2 |
| Shaft Key: | Flange |
| Port Orientation - Cover End: | N/A |
| Minor Diameter: | Standard Pilot |
Product Details
| Shaft Seal Type | 101.0 LB |
| Pilot Type | Flange Mount |
| Displacement Shaft End (cu in/revolution) | Right Hand (CW) |
| Model No. | 4525VQ42A17-11BB20 |
| Cover End RPM [Max | 3 1/2 |
| Shaft Key | Flange |
| Port Orientation - Cover End | N/A |
| Minor Diameter | Standard Pilot |
| Displacement Cover End (cu in/revolution) | 1.25 in |
| Shaft End Pressure [Max | 14 Tooth Splined |
| Port Type | 4525VQ |
| Pressure Port Size, Shaft End | 1 15/16 in |
| Minor Diameter [Max | Buna-N |
| Shaft Type | 2200 |
| Rotation | 1.04 in |
| GPM @ 1,800 rpm, Shaft End | SAE C, 2 Bolt |
| Pump Series | Single Shaft Seal |
| Integral Valve Configuration | 12/24 |
| Pressure Port Size, Cover End | 2200 |
| Seal Material | 2200 |
| Major Diameter [Max | N/A |
| Weight | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Cover End | 1.248 in |
| Relief Valve Setting | 1.247 in |
| Mounting Flange | N/A |
| Cover End Flow @ RPM | N/A |
| Shaft End RPM [Max | N/A |
| Minor Diameter [Min | 42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm |
| Port Size | 4525VQ42A17-11BB20 |
| Cover End Pressure [Max | 3000 |
| Major Diameter [Min | 2500 |
| Shaft Length | 25.5 |
| Controlled Flow Rate | 63 |
| Shaft Dia. | w/o Integral Valves |
| Manufacturer Part No. | Outlet 45° CCW from Inlet |
| Port Orientation - Shaft End | Outlet 90° CCW from Inlet |
| Spline Description | 1 in Flange |
| Mounting | 1 1/2 in Flange |
| Shaft End Flow @ RPM | 3.37 |
| Max. RPM [Max | 8.46 |