Yuken PV2R4-184-F-RAA-30 single Vane pump
With 13.5 mm B1 over 10170 full-service stores, our Yuken PV2R4-184-F-RAA-30 single Vane pump inventory is extensive and our parts are priced right. within 24 hours. This 311.8 mm d1 ≈ helps you maximize your productivity by saving time and your hard-earned dollars.
| Brand Name: | Yuken |
| Model Number: | PV2R4-184-F-RAA-30 |
| Pressure Port Size, Cover End: | 45.0 LB |
| Pump Series: | Flange Mount |
| Major Diameter [Min: | Left Hand (CCW) |
| Pressure Port Size, Shaft End: | 2520VQ21A11-11BC20-LH |
| Rotation: | 2.5 |
| Port Type: | Flange |
| Max. RPM [Max: | N/A |
| Shaft End Pressure [Max: | Standard Pilot |
Product Details
| Pressure Port Size, Cover End | 45.0 LB |
| Pump Series | Flange Mount |
| Major Diameter [Min | Left Hand (CCW) |
| Pressure Port Size, Shaft End | 2520VQ21A11-11BC20-LH |
| Rotation | 2.5 |
| Port Type | Flange |
| Max. RPM [Max | N/A |
| Shaft End Pressure [Max | Standard Pilot |
| Cover End RPM [Max | 0.875 in |
| GPM @ 1,800 rpm, Cover End | 13 Tooth Splined |
| Pilot Type | 2520VQ |
| Port Size | 1.375 in |
| Shaft Length | Double |
| Integral Valve Configuration | Buna-N |
| Minor Diameter [Max | 2500 |
| Spline Description | 0.715 in |
| Minor Diameter [Min | SAE B, 2 Bolt |
| Relief Valve Setting | Single Shaft Seal |
| Major Diameter [Max | 16/32 |
| Mounting | 2700 |
| Model No. | 2500 |
| Cover End Flow @ RPM | N/A |
| Shaft Seal Type | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Displacement Shaft End (cu in/revolution) | 4.1 |
| Mounting Flange | 0.872 in |
| Port Orientation - Cover End | N/A |
| Minor Diameter | N/A |
| Manufacturer Part No. | N/A |
| Controlled Flow Rate | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Cover End Pressure [Max | 2520VQ21A11-11BC20-LH |
| Seal Material | 3000 |
| Displacement Cover End (cu in/revolution) | 3000 |
| Shaft Type | 16.5 |
| Shaft End RPM [Max | 31.5 |
| Weight | w/o Integral Valves |
| GPM @ 1,800 rpm, Shaft End | Outlet 45° CW from Inlet |
| Shaft Dia. | Outlet 90° CCW from Inlet |
| Port Orientation - Shaft End | 3/4 in Flange |
| Shaft Key | 1 in Flange |
| Shaft End Flow @ RPM | 2.2 |