Rexroth HED8OA THROTTLE VALVE
With over 10170 full-service stores, our Rexroth HED8OA THROTTLE VALVE inventory is extensive and our parts Expansion Expansion / Non-expansion are priced right. within 24 hours. This helps 4 Number of Mounting Holes you maximize your productivity by saving time and your hard-earned dollars.
| Brand Name: | Rexroth |
| Model Number: | HED8OA |
| Major Diameter [Max: | 45.0 LB |
| Manufacturer Part No.: | Flange Mount |
| Shaft End Pressure [Max: | Right Hand (CW) |
| Shaft Key: | 2520VQ17A5-1DC20 |
| Shaft End Flow @ RPM: | 2 1/2 |
| Integral Valve Configuration: | Flange |
| Spline Description: | 3/16 in |
| Port Size: | Standard Pilot |
Product Details
| Major Diameter [Max | 45.0 LB |
| Manufacturer Part No. | Flange Mount |
| Shaft End Pressure [Max | Right Hand (CW) |
| Shaft Key | 2520VQ17A5-1DC20 |
| Shaft End Flow @ RPM | 2 1/2 |
| Integral Valve Configuration | Flange |
| Spline Description | 3/16 in |
| Port Size | Standard Pilot |
| Minor Diameter [Min | 0.875 in |
| Port Orientation - Shaft End | Straight w/ Key |
| Minor Diameter | 2520VQ |
| Shaft Dia. | 1.9375 in |
| Pressure Port Size, Cover End | Buna-N |
| Relief Valve Setting | 2500 |
| Cover End RPM [Max | N/A |
| Controlled Flow Rate | SAE B, 2 Bolt |
| Weight | Single Shaft Seal |
| Displacement Shaft End (cu in/revolution) | N/A |
| Cover End Flow @ RPM | 2700 |
| Displacement Cover End (cu in/revolution) | 2500 |
| Mounting | N/A |
| Pressure Port Size, Shaft End | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Shaft Length | N/A |
| Model No. | N/A |
| Rotation | N/A |
| Shaft Seal Type | N/A |
| Max. RPM [Max | N/A |
| Mounting Flange | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Cover End Pressure [Max | 2520VQ17A5-1DC20 |
| Port Orientation - Cover End | 3000 |
| Pilot Type | 3000 |
| Shaft End RPM [Max | 7.5 |
| Shaft Type | 25.5 |
| Major Diameter [Min | w/o Integral Valves |
| GPM @ 1,800 rpm, Cover End | Outlet 45° CW from Inlet |
| Pump Series | Outlet 90° CW from Inlet |
| GPM @ 1,800 rpm, Shaft End | 3/4 in Flange |
| Port Type | 1 in Flange |
| Seal Material | 1.1 |
| Minor Diameter [Max | 3.37 |