Rexroth 2FRM6 THROTTLE VALVE
With Cast Steel Housing Material over 10170 full-service stores, 8483.20.40.80 Harmonized Tariff Code our Rexroth 2FRM6 THROTTLE VALVE inventory is extensive and our parts are priced right. within 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars.
| Brand Name: | Rexroth |
| Model Number: | 2FRM6 |
| Cover End Flow @ RPM: | 76.0 LB |
| GPM @ 1,800 rpm, Shaft End: | Flange Mount |
| Integral Valve Configuration: | Right Hand (CW) |
| Port Size: | 3525V30A21-11AA22R |
| Weight: | 3 |
| Shaft Length: | Flange |
| Pump Series: | N/A |
| Major Diameter [Min: | Standard Pilot |
Product Details
| Cover End Flow @ RPM | 76.0 LB |
| GPM @ 1,800 rpm, Shaft End | Flange Mount |
| Integral Valve Configuration | Right Hand (CW) |
| Port Size | 3525V30A21-11AA22R |
| Weight | 3 |
| Shaft Length | Flange |
| Pump Series | N/A |
| Major Diameter [Min | Standard Pilot |
| Rotation | 1.375 in |
| Manufacturer Part No. | 14 Tooth Splined |
| GPM @ 1,800 rpm, Cover End | 3525V |
| Major Diameter [Max | 2 5/16 in |
| Shaft Seal Type | Buna-N |
| Shaft End RPM [Max | 1800 |
| Mounting Flange | 1.055 in |
| Minor Diameter [Max | SAE C, 2 Bolt |
| Minor Diameter [Min | Single Shaft Seal |
| Shaft Key | 12/24 |
| Port Orientation - Shaft End | 1800 |
| Controlled Flow Rate | 1800 |
| Mounting | N/A |
| Cover End Pressure [Max | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Pressure Port Size, Shaft End | 1.25 in |
| Cover End RPM [Max | 1.247 in |
| Port Orientation - Cover End | 1.06 in |
| Shaft Dia. | 1.05 in |
| Seal Material | N/A |
| Pilot Type | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Relief Valve Setting | 3525V30A21-11AA22R |
| Displacement Shaft End (cu in/revolution) | 2500 |
| Shaft Type | 2500 |
| Model No. | 31.5 |
| Minor Diameter | 45 |
| Displacement Cover End (cu in/revolution) | N/A |
| Shaft End Pressure [Max | Outlet 135° CCW from Inlet |
| Port Type | Outlet Opposite Inlet |
| Spline Description | 1 in Code 61 |
| Shaft End Flow @ RPM | 1 1/4 in Code 61 |
| Max. RPM [Max | 4.1 |
| Pressure Port Size, Cover End | 5.9 |